Protocol Converter Series

 

HPT-DEV-S03 (05) realize level switch between G.703 E1 interface and V.35 data interface, run full duplex. E1 interface transmission can reach 300m (75Ω) or 800m (120Ω).

     Transfer V.35 into G.703 E1 interface

     Data interface speed rate is 2.084Mbps

     Two types of working clock style: principal and subordinate

     E1 interface impedance can set up to 75Ω or 120Ω

     Optional 220V AC or –48V DC power supply (2) interface standard

          E1 interface standard

2M interface: ITU-T G.703, G.704

Code: HDB3

Code speed: 2.048Mb/s±50ppm

Impedance: unbalance 75Ω/BNC

Balance: 120Ω/RJ45

          V.35 interface standard

Code speed rate: 2.048Mb/s±50ppm

Time: principal/subordinate clock optional

 

  

 

HPT-DEB-S06 takes out the appointed slot freely from E1 signal; construct the data path of n* 64 kbps bandwidth. It provides n*64kbps transmission bandwidth with E1 Huber free slot, and to be transmitted through multiplexer and etc., then the two LANs links into two network sections in one LAN, use the same IP address. HPT-DEB-S06 can learn MAC address automatically, and filter the data packet according to address forms (can close this function), which transparent to TCP/IP protocol. HPT-DEB-S03 is for no frame transmission and without slot transparent transmission.

HPT-DEB-S06 has table, hanging, card and plug-in box types. It puts in 19-inch machine and adopts machine structure can realize integrated network management and power supply.

        Transfer 10Base-T Ethernet interface to E1 interface

        Transmission interface speed rate is 2.048Mbps

        E1 interface can set up principle and subordinate working style

        E1 interface impedance can set up to 75Ω or 120Ω 

        Optional 220V AC or –48V DC power supply

User interface: 10 Base-T

        Interface standard: in conformity with ITU-T802.3 standard

        Transmission code speed: 2.048Mb/s±50ppm

        E1 interface standard: completely in conformity with ITU-T G.703, G.704 suggestion standard

        interface type: unbalance 75Ω/BNC balance120Ω/RJ45

       

 

HPT-DEB-S04 1~4E1/10Base-T interface converter is a high performance Ethernet bridge, realizes 10M Ethernet data transmit to 1~4 G.703 E1 path as an Ethernet extend equipment. HPT-DEB-S04 uses the present network of E1 path to realize the two Ethernets link together with lower cost. It can learn continuously MAC address that connecting with the LAN, and transmit to another LAN frame as a targeted address, the biggest transmission speed rate is 7.68Mbps; it adopts the newest ASIC circuit design, real-time analyses 4 E1 transmission link, and analyses the line quality of E1 link automatically, then cut down the transmission of this link automatically if it has situations as broken circuit, code error, delay, alarm and etc. It has no bad influence as broken circuit, lost package and etc. to Ethernet. When E1 transmission becomes normal, it goes back the transmission of this link.

       High performance Ethernet bridge, low cost Ethernet extend equipment

       Allow 4 E1 to have 8ms transmission delay inequality

       In conformity with 802.3, ITU-T G.703 G.704 standard

       10Base-T Ethernet interface

       Full duplex working mode

       Transmission speed rate reach 7.68Mpbs

Standard: ITU-T G.703, G.704

E1 interface: Unbalance 75Ω/BNC balance 120Ω/RJ45

Code：HDB3

Clock：restore clock（REC）

standard：In conformity with IEEE802.3

speed rate：10Mbps

working mode： Full duplex

connector：10Base-T（UTP），RJ-45

input voltage:　　Optional

power consumption:　 ≤5W

working temperature　　　－5℃～50℃

Storage temperature:　－40℃～+70℃

Relative humility:　　10%～90% no condensing

No corrosive and solvent gas, dusty and the strong magnetic field interfere。

stand alone（19″）：Outline

440mm(width)×43.5mm(high)×150mm(depth)