Vispace 1000/OPS, 1U, 19 inches, used in 1+1 backup of optical lines, can switch to the standby optical lines automatically to keep the signal in transmitting in case that the main lines are broken.
Illustration for 1+1 Protection Function
OPS Feature
鈼 LED for indicating the port status of optical line
鈼 set the switch threshold value or alarm threshold value by network management system
鈼 With 2 kinds of working mode: auto back to main line mode and non auto mode
鈼 Auto switch, manually switch and remote switch of the device
鈼 Auto switch time is less that 25ms.
鈼 With redundancy power supply
鈼 Remote manageable function with SNMP
OPS Technical Specification
|
Parameter |
Min. Value |
Typical value |
Max. Value |
|
Wavelength |
1310卤40nm or1550卤40nm |
|
Insertion loss, Tx |
|
3.5dB |
4.0dB |
|
Insertion loss, Rx |
|
1.0 dB |
1.3 dB |
|
Return loss |
55 dB |
60 dB |
|
|
Polarization loss |
|
0.06 dB |
0.1 dB |
|
Repetitiveness |
|
卤0.02 dB |
卤0.03 dB |
|
Isolation |
|
-60 dB |
-50 dB |
|
Input optical power |
|
|
24 dBm |
|
Switching time |
|
|
25ms |
|
Threshold value, auto switching
鐜囪缃 |
-40 dBm |
|
20 dBm |
|
Power supply |
-48V DC or 220V AC |
|
Switching mode |
Auto銆乫orced manually銆乺emote |
|
Optical port, Rx/Tx |
SC/APC銆丼C/UPC銆丗C/APC銆丗C/UPC |
|
Manageable Port |
RJ45 |
|
Management protocol |
SNMPV1,V2 |
|
Working temp. |
0~65鈩 |
|
Storage temp. |
-25~65鈩 |
|
dimension |
44锛圚锛壝280锛圖锛壝440锛圵锛 锛坢m锛 |
Optical Bypass Line Protection Switch (OBS)
Vispace 1000/OBS Briefing
Optical bypass switch system, the common intelligent system manufactured by Visint Communication Technology Co., Ltd to meet requirements of the development of optical communication system and project application, applies the accurate software adjustment technology to monitor the intensity of laser light of the transmission path. It can switch the optical path according to system setting and transmission status, to protect the bypass transmission line and the entire optical network.
Feature and Application
|
Feature |
1锛嶩igh precision measure |
|
2锛嶭ow power consumption |
|
3锛嶴teady and reliable |
|
4锛嶦xcellent cost performance ratio |
|
5锛嶳J-45 Port is available |
|
6锛嶣e convenience to configure and monitor the device |
|
7锛嶮eet the requirement of auto measurement and protection |
|
Application |
1锛嶱rotection and restoration of the optical channel and devices of the optical network |
|
2锛嶵he essential device to construct and maintenance communication system project. |
Solutions
Technical Specification
|
wavelength |
1310卤50nm or1550卤50nm |
|
Insertion loss |
鈮1.5dB(Bypass loss)
鈮2.0dB(Device loss) |
|
Return loss |
鈮45dB |
|
Adaptor |
FC/PC(Optional) |
|
Switching time |
<25ms |
|
Optical power supervisory range |
-3dBm~+20dBm |
|
Supervisory precision |
卤0.5dB |
|
Bypass optical power threshold value |
-20dBm锛坉efault setting锛 |
|
Manageable Port |
RS-232 or RJ-45 |
|
Power supply |
DC48V or AC 220V |
|
Dimension |
Standard chassis, 19鈥, 1U |
|
Working Temp. |
0~+60鈩 |
|
Storage Temp. |
-20~+70鈩 |
Ordering Information
